Ambient Weather WS-108 Instrukcja Użytkownika Pobierz pdf (Strona 14)

5.4 Indoor Thermo-Hygrometer-Barometer Transmitter

The indoor thermometer, hygrometer and barometer measures and displays the indoor temperature,

humidity and pressure and transmits this data to the display console.

Figure 12

Note: Do not install the thermo-hygrometer-barometer transmitter outside. This will cause errors

in the barometric pressure due to large variations in temperature (barometric pressure is temperature

compensated for accuracy). Note that pressure readings made inside your home, business, or facility

will correspond closely to the actual barometric pressure outside.

Note: The thermo-hygrometer-transmitter transmits directly to the display console. For best

results, place between 5 to 20 feet from the display console.

Note: To avoid permanent damage, please take note of the battery polarity before inserting the

batteries.

Remove the battery door on the back of the sensor with a Philips screwdriver (there is only one screw,

at the bottom of the unit). Insert two AAA batteries, as shown in Figure 13.

Replace the battery door and set screw. Note that the temperature, humidity and barometric pressure

will be displayed on the LCD display. Looking at the back of the unit from left to right, the polarity is

(-) (+) for the top battery and (+) (-) for the bottom battery.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 45 46

Brak uwag

Ambient Weather WS-108 Instrukcja Użytkownika Strona 14